Single-Leaf Temporary Site Gate™
SiteGard Single-Leaf Temporary Site Gate™ is the ideal solution when wanting secure pedestrian entrances on building sites.
The mesh clad frame ensures good visibility through the gate, helping to improve safety around construction traffic.
SiteGard Single-Leaf Temporary Site Gate™
Secure your pedestrian site personnel entrances with the single-leaf SiteGard gate. The mesh clad frame of this pedestrian gate ensures good visibility helping to improve safety with construction traffic.
The flat wire weld-mesh of SiteGard construction gates also prevents climbing, helping to keep your site secure.
These pedestrian temporary site gates are incredibly robust because unlike other brands of site gate, the gate, frames and posts are all powder coated black. This powder coating protects the steel and provides a long-lasting high-quality finish. The site gates are so robust that they can even be reused on different sites.
Temporary Works Approved
All SiteGard standard gates and post sets are Temporary Works Approved. This takes into account wind loadings for all mainland UK wind zones as well as notional crowd loadings, in accordance with Temporary Works Forum (TwF) guidance. The calculations have been carried out using British Standards design codes.
Features include:
- Padlockable Slidebolt
- Safety Gate Restrainer
- Adjustable Hinges
- Ply Can Be Clad Over Mesh
- The flat mesh on SiteGard allows for timber to be clad over the top of the gate frame (holes included). This provides an extra level of protection and privacy.
Product & Finish Standards
- Gate frame and posts powder coated black.
- All stock gates come as standard at 2.4m high and are clad with flat weld-mesh.
- Gate set includes 1No. gate leaf, 2No. dig-in type posts, pad-lockable slide-latch and 2No. adjustable hinges.
- All stock gates come with Safety Gate Restrainers as standard.
Specifications
Height – 2400mm
Width – 1300mm
Timber Cladding – Supplied and fitted on-site by customer
Gate Frame Size SHS – 40mm SHS
Post size/ Length Dig-in type – 80mm SHS x 3200mm
Mesh Aperture Size – 200 x 50mm
Loadings:
This structure has been designed in accordance with the following guidance:
- BS EN 1991-1-4:2005 – Wind Actions & TG20-13 Wind Guidance
- BS 5975:2008 – Code of practice for temp. works procedures and the permissible stress design of falsework
- BS 6180:2011 – Table 2
- TWf 2012:01 HOARDINGS: A guide to good practice
- BS EN 1990- Basis of structural design
- BS EN 1993-1-1 Design of steel structures- General rules and rules for buildings
- BS EN 1990- Basis of structural design
- BS EN 5950-Steel member design
Other Options
Take a look at our other SiteGard temporary site gates.
Options:
- Base plated posts (where soft dig isn’t an option)
- Strapped posts (to bolt to pre-formed concrete blocks)
- Bespoke height and widths available to order as per customers requirements
