CLD DULOK-8 SR1™
DOUBLE WIRE PANEL SYSTEM TO SECURED BY DESIGN
CLD DULOK-8 SR1™ double wire panel system designed for even the smallest of security enhancements for perimeter fencing.
CLD DULOK-8 SR1™ SPECIFICATION
Secured by Design accredited security fencing.
CLD DULOK-8 SR1 is certified to LPS 1175 SR1 Security Ratings. This means it’s guaranteed to stop any attacks from basic tools, and with Secured by Design accreditation from the UK Police, it provides the perfect perimeter for public buildings, schools and sports pitch applications.
Featuring a range of security enhancements that give this perimeter fencing an edge, adding immeasurable protection to your premises. These modifications make Dulok-8 SR1™ an even greater defence against criminals than our base Dulok™ system.
Dulok-8 SR1™ mesh panels are made from twin, heavy-duty 8mm wires welded on either side of 6mm vertical wires, but rather than using pin hex screws, they are fixed to galvanised steel posts using Sheardrive security bolts; practically impossible for vandals and intruders to remove.
You also have the option to include further deterrents to the top of each panel with Dulok-8 SR1™ being compatible with our Active Anti-Intruder topping range.
FINISH
Our welded steel wire mesh fencing panels are hot dip galvanised only or galvanised and polyester powder-coated. The standard colour is Green RAL 6005. RAL range of colours available.
PANEL DIMENSIONS
Heights – 1830, 2030, 2430, 3030mm
Panel width – 2506mm
Mesh size – 200 x 50mm
Wire diameter – 6mm verticals 2 x 8mm horizontals
Top edge projection – 30mm†
† Can be inverted to give flush edge
All dimensions are nominal
CLD DULOK-8 SR1™ POSTS AND CLAMPS
For the Dulok-8 SR1 double wire panel system, CLD has developed a post and clamp bar system which provides a simple method of securing. Complete with an anti-vandal fastener, installed with either a battery-powered driver or traditional tools, this system offers a rapid and secure installation.
SLOPING GROUND
Panels can be stepped as required. Where gradients exceed 1:16, it is recommended that taller panels are either part-buried or additional posts are used.
VARIATIONS
The posts are available in a range of lengths to accommodate panel heights and ground conditions. In addition, many variations are available.
CLD Fencing Options
Take a look at our full range of CLD commercial fencing options
DIMENSIONS
Posts – 60 x 40mm RHS (up to 2430mm) 80 x 40mm RHS (3030mm)
Corner posts – 60 x 40mm RHS (up to 2430mm) 80 x 40mm RHS (3030mm)
Post centres – 2520mm
Clamping channel – 40 x 5mm Steel
