CLD ULTIMATE EXTRA SR1™
PROFILED PANEL SYSTEM TO SECURED BY DESIGN
CLD ULTIMATE EXTRA SR1™ profiled panel system is perfect for places like the Ministry of Defence buildings, police station and airports.
CLD ULTIMATE EXTRA SR1™ SPECIFICATION
There are premises where only the highest levels of security will suffice. Places like Ministry of Defence buildings, police stations and airports, where you need guarantees that your fencing is up to the task. It’s these locations that Ultimate Extra SR1™ was designed for.
As the highest security profiled panel system in our Ultimate™ range, Ultimate Extra SR1™ includes many enhanced security features, including durable 6mm diameter wires, projecting spikes at the top of each panel, large steel posts, a full length clamp bar, plus revolutionary built-in SafeTfix security fixings that are totally enclosed.
Conforming to BS 1722-14 for open mesh steel panel fences and carrying certification to Loss Prevention Standards 1175 Security Ratings (SR1), it will withstand attacks from standard hand tools. Plus, as an added seal of approval, Ultimate Extra SR1™ comes with the UK Police Secured by Design accreditation as an effective form of crime prevention.
FINISH
Our welded steel wire mesh high security fencing panels are galvanised and polyester powder-coated after stringent cleaning and treatment to give a well-adhered coating of 60 microns. RAL range of colours available.
PANEL DIMENSIONS
Heights – 2030, 2430, 3030mm
Panel width – 2475mm 2050mm (3030mm)
Mesh size – 165 x 25mm
Wire diameter – 6mm
Triangular folds – 3 or 4
Top edge projection – 25mm†
† Can be inverted to give flush edge
All dimensions are nominal
CLD ULTIMATE EXTRA SR1™ POSTS AND CLAMPS
For the Ultimate Extra SR1 profiled panel system, CLD offers a standard post and clamp system which provides a complete method of securing, allowing infinitely variable stepping of panels within the post length. It is versatile, strong, simple to fix and vandal resistant, yet allows panels to be removed without damage to either post or clamp. Accidentally damaged panels can be replaced without removing the post.
SLOPING GROUND
Panels can be stepped as required. Where gradients exceed 1:16, it is recommended that taller panels are either part-buried or additional posts are used.
VARIATIONS
In addition to the standard posts many variations are available to accommodate site requirements.
DIMENSIONS
Posts – 80 x 40mm RHS
Flat clamp bars – 41 x 21mm
Post centres – 2485mm, 2060mm (3030mm)
