CLD SECURUS ™
FLAT PANEL SYSTEM
CLD Securus™ flat panel system is an incredibly hard wearing and the first line of defence in high security fencing systems.
CLD SECURUS™ SPECIFICATION
Immensely versatile, incredibly hard wearing and the first line of defence in high security fencing systems, Securus™ is the number one choice for everywhere from schools and business parks right up to police stations, secure units and Ministry of Defence facilities that require a dedicated level of security fencing.
The 4mm welded steel wires that form each mesh panel are extremely difficult to climb over, and with each panel fixed to a continuous flanged steel post using non-removable shear nuts, the strength of Securus™ ensures a great defence from vandals and intruders and it is ready to be upgraded to SR1 should your threat level increase at any point.
With the flush finish of the panels, there’s no overlapping, so installation is quick and easy. This also makes Securus™ ideal for sports facilities as an alternative to conventional rebound boards. It’s available in a range of RAL colours too, so you can match it with your organisation’s colour scheme.
FINISH
Our welded steel wire mesh fencing panels are galvanised and polyester powder-coated after stringent cleaning and treatment to give a well-adhered coating of 60 microns. Or available as galvanised only which is a high aluminium content galvanising giving four times the life of BS 443. This finish is free of the sharps and irregularities found in the hot dip galvanising process. RAL range of colours available.
PANEL DIMENSIONS
Heights – 1830, 2030, 2440, 3000 mm other heights from 500mm up to 6000mm available on request with different post options
Panel width – 2515mm
Mesh size – 76.2 x 12.5mm
Wire diameter – 4mm (horizontals and verticals)
Top edge projection – Nil – wire is flush on all edges
All dimensions are nominal
CLD SECURUS POSTS AND CLIPS
For the Securus flat panel system, CLD offers their own unique state of the art post. A roll formed section designed to facilitate ease of installation, providing maximum security when combined with security fastenings.
SLOPING GROUND Panels can be stepped as required on the post system. Where gradients exceed 1:16, it is recommended that taller panels are either part-buried or additional posts are used. Panels can also be sloped to the following gradients, within the tolerance of the post section:
1830mm high: 1 in 45 2030mm high: 1 in 50 2440mm high: 1 in 60 3000mm high: 1 in 75
VARIATIONS The posts are available in different lengths to accommodate panel heights and ground conditions.
- Wall fixing plates, cranked posts or base plated
- Cranked or straight extensions for barbed or razor wire
- Cranked panels
Posts made from standard sections are available.
DIMENSIONS
Posts – 80 x 60mm special flanged section (patent applied for)
Corner posts – 80 x 80mm standard RHS section
Post centres – 2520mm
