CLD ECLIPSE-60™
PROFILED PANEL SYSTEM
CLD ECLIPSE-60™ profiled panel system is a general purpose security fencing, offering the ideal fencing solution for your perimeter.
CLD ECLIPSE-60™ SPECIFICATION
CLD Eclipse-60 is a security fence featuring 30mm projecting anti-climb spikes that make it extremely difficult to climb over, and enhanced anti-tamper features that ensure your fencing provides an excellent deterrent against vandals and intruders.
The new name in General Purpose Security Fencing, Eclipse-60™ offers the ideal fencing solution for your perimeter security requirements. Named after the size of its hollow steel posts – which measure 60 x 60mm – Eclipse-60™ is a cost-effective variant of the standard Exempla™ rigid mesh panel system.
Each profiled panel features 30mm projecting spikes.
This Eclipse-60™ wire mesh fencing panel system uses strong wrap-around metal clips (rather than a clamp bar) to hold the welded steel mesh panels to the steel posts. These clips – with 90º angled returns that prevent tampering – fit into threaded inserts on the posts and are fixed in place using pin torx bolts for enhanced security.
The profiled mesh panels are first galvanised and then polyester powder-coated and whether it is protecting public buildings, car parks, business parks or retail premises, the Eclipse-60™ system is available in a full range of RAL colours, so you can match it to your corporate colour scheme.
FINISH
After stringent cleaning and treatment, our welded galvanised steel wire mesh fencing panels are polyester powder-coated to give a high adhered coating in green RAL 6005 (full spectrum of colours available).
PANEL DIMENSIONS
Heights – 1230, 1730, 1930, 2330, 3030mm*
Panel width – 2500mm or 3000mm (up to 2330mm) *2800mm (3030mm only)
Mesh size – 200 x 50mm
Wire diameter – 5mm
Top edge projection – 30mm†
† Can be inverted to give flush edge.
All dimensions are nominal
CLD ECLIPSE-60™ POSTS
For the Eclipse profiled panel system, CLD has developed a unique style of individually clipping the panels to the posts, using a preformed clip that clamps the panel securely to the posts by fitting across the front and then secured with capped off bolt heads.
The clip is then fixed into place using a tamper resistant bolt that screws into an insert in the face of the post. These clips are strategically spaced apart depending on the height of the panel to maximise security and to allow the stepping of panels for the accommodation of sloping ground.
SLOPING GROUND
Panels can be stepped as required. Where gradients exceed 1:16, it is recommended that taller panels are either part-buried or additional posts are used.
VARIATIONS
In addition to the standard posts many variations are available to accommodate site requirements:
- Alternative sections
- Wall fixing plates, cranked posts, or base plated
- Cranked or straight extensions for barbed or razor wire
- Cranked panels
- Spigoted base plate
DIMENSIONS
Posts – 60 x 60mm RHS (up to 2330mm) 80 x 40mm RHS (up to 3000mm)
Corner posts – 60 x 60mm
Post centres – 2510mm or 3010mm (up to 2330mm) 2810mm (3030mm only)
Unbeatable Installation Guarantee
We guarantee our commercial fencing installation for 10 years because we are confident it will last.
Unlike many commercial fencing contractors who only provide the manufacturer’s warranty for materials, we also cover our installation.
You can trust that our work will hold up for a decade longer than anyone else’s.
Quick Quote for Commercial Fencing and Gates
If you’re looking for reliable, experienced commercial fencing contractors, Knight Fencing is the trusted supplier you’ve been looking for.
We offer a free site visit and quotation, ensuring you get the best fencing and gate solution for your commercial property.
Contact us today to discuss your project and get expert advice from our team.
Use Quick Quote and you can get a quote for your commercial fencing and gates in a fraction of the normal time.
